Unsupported connection may result in damage. The functions that can be used and the information that can be displayed will differ depending on the models being connected. You can damage both your unit and the CD changer if you connect them incorrectly. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in.
CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. If that does not solve the problem, consult your Kenwood dealer. Normal operation should be restored. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation.
Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. NOTE Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts.
Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Your CDs can get scratched if you put them in a dusty CD slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit.
Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Refer to the instruction manual of Sirius Satellite radio tuner KTC-SR optional accessory , when connected, for the operation method.
Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you. Record the serial number, found on the back of the unit, in the spaces. Refer to. Safety precautions About Sirius Satellite radio tuner. Notes on playing MP About CDs General features Auxiliary Input Display Setting. Tuner features Menu system S] button for at least 2 seconds. Each time the button is pressed the character type switches as shown below.
Characters can be entered by using a remote with a number buttons. S] button. Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary input source. The presently selected AUX Name is blinks. Each time the button is pressed it switches through the below displays. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button.
Drop open the faceplate. Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. The faceplate is locked in place, allowing you to use the unit. Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below.
Direct Access Tuning Function of remote Entering the frequency and tuning. Example: Desired frequency Press button Station Preset Memory Putting the station in the memory. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically.
Preset Tuning Calling up the stations in the memory. When a disc is inserted Press the [SRC] button. Select the "CD" display. Pause and play Press the [38] button. Each time the button is pressed it pauses and plays. Eject the disc 1 Drop open the faceplate Press the Release button. Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
Press the [SRC] button. Select the display for the disc player you want. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Canceling Direct Disc Search Press the [38] button. Press the [REP] button. Each time the button is pressed the Repeat Play switches as shown below. Random Play Play all the songs on the disc or MP3 folder in random order.
Press the [RDM] button. Magazine Random Play Function of disc changer Play the songs on all the discs in the disc changer in random order. Press the [M. RDM] button. Scan Play Playing the first part of each song on the disc or MP3 folder you are listening to and searching for the song you want to listen to. SEL] button.
During Select mode the folder information is displayed as shown below. Returning to the top level Press the [3] button. Canceling the Folder Select mode Press the [F. Press the [DISP] button for at least 1 second. The disc being displayed is played.
Setting during operation beep sound etc. You can continue by returning to step 2 and setting other items. Note, the Security Code can be set as the 4 digit number of your choice. The Security Code function activates. When the wrong Code is entered in steps 4 through 6, repeat from step 4.
Press the Reset button and when it's removed from the battery power source 1 Turn the power ON. The unit can be used. The clock display blinks.
DSI Disabled System Indicator A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Switching Display Type Setting the Display type. Select the "COL" display. Release your finger at the color you want. Quick call up the preset color Press the desired [1] — [4] button. Each time the button is pressed the Color mode switches as shown below. Display Color mode "Scan" The color changes in sequence.
Keeps the presently set color. Blue fine adjustment 1 Press the [3] button for at least 2 seconds. When the blue fine adjustment is completed, press the [3] button. Contrast Adjustment Adjusting the display contrast. Bass Management System Adjust the bass boost level of the external amplifier using the main unit. Display Setting "Zone 2 Rear" The front is this unit's internal source, and the rear is selected source sound.
Frequency Offset Setting the central frequency boosted by B. Text Scroll Setting the displayed text scroll. The text scrolled is shown below.
Loading and Replacing the battery Use two "AA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. When it is pressed again it returns to the previous level. External view External view Number of items Number of items 1 If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
The unit may be damaged or fail to work if you damage to the unit. Make sure only to use the accessories shipped with share the - wires or ground them to any metal part in the car. Make the proper input and output wire connections for each unit.
Reconnect the - battery. Press the reset button. To car light control switch 8. Firewall or metal support Screw M4X8 commercially available. Self-tapping screw commercially available. Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Metal mounting strap commercially available. Otherwise it may fall out of. AWG18 or more to prevent wire. The unit may break or crack because it. LCD is damaged or broken due to shock. If the liquid crystal fluid from the LCD.
To prevent damage to the machine,. Also avoid places with too much dust or the. Using a fuse with. Use only the. If you use the wrong. Refer to the catalog or consult your Kenwood.
Unsupported connection may result in. Setting the "O-N" Switch to the "N" position for. The functions that can be used and the. You can damage both your unit and the CD.
Do Not Load 3-in. CDs in the CD slot. If you try to load a 3 in. CD with its adapter. Therefore, what appears on the display. Cleaning the Faceplate Terminals. If the terminals on the unit or faceplate get. If the faceplate of this unit is stained, wipe it.
If the faceplate is stained badly, wipe the stain. Applying spray cleaner directly to the unit may.
0コメント